Open topic with navigation
If ⎕FR is 645, all floating-point calculations are performed using IEEE 754 64-bit floating-point operations and the results of these operations are represented internally using binary641 floating-point format.
If ⎕FR is 1287, all floating-point calculations are performed using IEEE 754-2008 128-bit decimal floating-point operations and the results of these operations are represented internally using decimal1282 format.
Note that when you change ⎕FR, its new value only affects subsequent floating-point operations and results. Existing floating-point values stored in the workspace remain unchanged.
The default value of ⎕FR (its value in a clear ws) is configurable.
⎕FR may be localised. If so, like most other system variables, it inherits its initial value from the global environment.
However: Although ⎕FR can vary, the system is not designed to allow "seamless" modification during the running of an application and the dynamic alteration of is not recommended. Strange effects may occur. For example, the type of a constant contained in a line of code (in a function or class), will depend on the value of ⎕FR when the function is fixed.
⎕FR←1287 x←1÷3 ⎕FR←645 x=1÷3 1
The decimal number has 17 more 3's. Using the tolerance which applies to binary floats (type 645), the numbers are equal. However, the "reverse" experiment yields 0, as tolerance is much narrower in the decimal universe:
⎕FR←645 x←1÷3 ⎕FR←1287 x=1÷3 0
Since ⎕FR can vary, it will be possible for a single workspace to contain floating-point values of both types (existing variables are not converted when ⎕FR is changed). For example, an array that has just been brought into the workspace from external storage may have a different type from ⎕FR in the current namespace. Conversion (if necessary) will only take place when a new floating-point array is generated as the result of "a calculation". The result of a computation returning a floating-point result will not depend on the type of the arrays involved in the expression: ⎕FR at the time when a computation is performed decides the result type, alone.
Structural functions generally do NOT change the type, for example:
⎕FR←1287 x←1.1 2.2 3.3 ⎕FR←645 ⎕DR x 1287 ⎕DR 2↑x 1287
128-bit decimal numbers not only have greater precision (roughly 34 decimal digits); they also have significantly larger range – from ¯1E6145 to 1E6145. Loss of precision is accepted on conversion from 645 to 1287, but the magnitude of a number may make the conversion impossible, in which case a DOMAIN ERROR is issued:
⎕FR←1287 x←1E1000 ⎕FR←645 ⋄ x+0 DOMAIN ERROR
When experimenting with ⎕FR it is important to note that numeric constants entered into the Session are evaluated (and assigned a data type) before the line is actually executed. This means that constants are evaluated according to the value of ⎕FR that pertained before the line was entered. For example:
⎕FR←645 ⎕FR 645 ⎕FR←1287 ⋄ ⎕DR 0.1 645 ⎕DR 0.1 1287